Cobber and rose gold nuances are popular right now, both when it comes to interior design and jewelry. Thus we want to show you a little inspiring jewelry collection in these exciting colours. Underneath every piece of jewelry is a list of the beads and jewelry parts used, all from Smyks’ webshop. Remember to, as always, make reservations for products no longer in stock.
Enjoy.
Bracelet with delica beads.
For this bracelet you’ll need the following materials:
Delica bead in Peach
Delica bead in Cobber
Delica bead in Ivory
1pc. small fresh water pearl
Wire, aprox. 3 x 25cm, metallic tigertail wire 0,20
2pcs. silver plated crimp beads
2pcs. cobber crimp covers
2pcs. cobber jumprings
1pc. cobber lobster claw clasp
Additionally see DIY mini-bracelets and earrings. Here we have put together 3 bracelets, and the crimp cover hides all 3 crimp beads.
Hoops with delica beads.
For these earrings you’ll need the following materials:
Delica bead in Peach (see the product link above)
Delica bead in Cobber (see the product link above)
Delica bead in Ivory (see the product link above)
1 pair of 20mm sterling silver hoop earrings
1 pair of 30mm sterling silver hoop earrings
2pcs. frosted 6mm rose gold steel bead
2pcs. white 6mm shellpearls
Long necklace with delica beads.
For this necklace you’ll need the following materials:
Delica bead in Peach (see the product link further above)
Delica bead in Cobber (see the product link further above)
Delica bead in Ivory (see the product link further above)
1pc. approx. 70cm. 0.3mm metallic tigertail beading wire
2pcs. silver plated crimp beads (see the product link further above)
2pcs. cobber crimp covers /see the product link further above)
2pcs. closed 4mm silver jumprings
2pcs. open 4mm silver jumprings
1pc. silver s-hook clasp
1pc. 5cm sterling silver cable chain (optional)
Bracelet with cross and crystals.
For this bracelet you’ll need the following materials:
1pc. rose-gilded cross with crystals
1pc. approx. 40cm golden sand woven nylon cord
1pc. cobber lobster claw clasp with chain.
Bracelet with alternating frosted and sheer ros gold beads.
For this bracelet you’ll need the following materials:
7pcs. 8mm sheer rose-gilded steel beads
7pcs. 8mm frosted rose-gilded steel beads
2 meters of woven nylon cord in Golden sand
Bracelet with cord and cobber ring.
For this bracelet you’ll need the following materials:
1pc. planished 25mm cobber ring
approx. 2 meters woven nylon cord in grey
1pc. sterling silver lobster claw clasp with 3mm glue-in ends.
Necklace with rosegold beads.
For this necklace you’ll need the following materials:
1pc. approx.80cm 1.5mm silver plated ball chain
1pc. approx. 80cm 1.5mm cobber coloured ball chain
1pc. 10mm rose-gilded steel bead with a large hole
1pc. red-gilded zirconia embezzeled brass bead.
Necklace with crystal encrusted cobber bead.
For this necklace you’ll need the following materials:
1pc. 10mm sheer rose-gilded steel bead (see product link further above)
1pc. 8mm sheer rose-gilded steel bead (see product link further above)
1pc. 6mm sheer rose-gilded steel bead (see product link further above)
1pc. 12mm rose-gilded brass bead with zirconia
1pc. approx. 80cm cable chain in silver-plated brass (see product link furter above)
Bracelet with Stingray Skin cord and magnetic clasp.
For this bracelet you’ll need the following materials:
1pc. approx. 19cm Stingray Skin cord in Creme
1pc. 7mm rose-gilded steel magnetic clasp
Jewlery adhesive
Necklace with Stingray.
For this necklace you’ll need the following materials:
1.5 mm approx. 40cm cobber coloured ball chain (see the product link further above)
1pc. approx. 19cm Stingray Skin cord in Creme (see the product link further above)
1pc. silver S-hook clasp (see the product link further above)
2pcs. 7mm silver cord ends with eyes
If you have a comment or a question, feel free to write in the section below.
We will publicly show your name and comment on this website. Your email is to ensure that the author of this post can get back to you. We promise to keep your data safe and secure.